Tracks

Train Tracks are created at Train Stations and at existing Tracks.

To enter track construction mode select the track icon the furthest right in the build category list then select an existing piece of track, usually and end piece, indicated by the red marker. It's usually best to construct your Train Station first and then start building from the track at the station.

Type

Land

Unsupported Bridge*

Supported Bridge**

Land tracks are constructed on the surface and the land will adjust to match your track section. There is a limit to how high or low the land will adjust to accommodate your track though. Roads and paths can cross a flat and straight track section.

Bridge mode allows you to build tracks which go over water, buildings and let you reach otherwise inaccessible areas.
*max # of consecutive Unsupported Bridge Tracks = 8
**max height of Supported Bridge Tracks = 40

Direction and Elevation

Left	Straight	Right
Down	Flat	Up

Left & Right require 4 tiles (2x2)

Straight requires 1 tile with no change in elevation trajectory

Straight requires 2 tiles with a change in elevation trajectory

Step

(Straight Only)

Step Down

Small Step Down

Small Step Up

Step Up

Small Step (Up or Down) requires 2 tiles

Step (Up or Down) requires 3 tiles

S-Bend

(Flat Only)

SBend Left

SBend Right

S-Bend require 4 tiles in an "S" shape